Furnace Repair Cost (2026)

By the Home Repair One data team · Updated September 14, 2026 · Ranges from our estimator engine

Short answer: In 2026, a typical furnace repair visit runs about $400–$600 for diagnosis plus a common fix such as an ignitor, flame sensor, or capacitor. That band is the engine's national range for a standard repair call, not a heat-exchanger replacement. A cracked heat exchanger is a carbon-monoxide safety issue and usually means a new furnace, not a $500 part swap. After-hours no-heat calls in deep winter cost more than a scheduled weekday visit.

Free instant estimate

See your own price now

Answer a few quick questions, your local range appears instantly, no email required to see it.

See my price range(561) 220-0117

No email to see your price · One vetted pro, matched to you

What a standard furnace repair visit costs

Most winter service calls are diagnosis plus a failed wear part. Here is the 2026 national range from our cost model. Your ZIP and whether this is an emergency visit tune it in the estimator.

ScopeTypical range
Furnace repair$400–$600
Updated 2026Informational ranges from our 2026 cost model, not quotes.

Blowing cold, or not turning on

A dirty flame sensor, a failed ignitor, a tripped safety switch, or a thermostat problem are the usual suspects. A licensed tech should tell you which it is, and the repair price, before they start. With gas, they also have to rule out a cracked heat exchanger.

When it is dangerous

A smell of gas, soot, or a carbon-monoxide alarm means shut the furnace off and call. Working CO detectors are not optional. A cracked heat exchanger is not a repair we will dress up as a cheap part. Replacement math lives on the HVAC cost guide.

Furnace repair or replacement: compare the installed scope

Ask the technician to name the failed part and separate a repair quote from a replacement quote. Record the furnace age, repair history, and whether a cracked heat exchanger was ruled out. A cracked heat exchanger is a carbon-monoxide safety issue and usually ends the repair conversation.

Copy these fields into your quote comparison
RecordRepair optionReplacement option
DiagnosisWhich part failed, and what remains serviceable?Why is replacement recommended for this specific furnace?
Installed scopeParts, labor, service call, and any follow-up visitEquipment, venting or flue work, gas or electrical connections, removal, and commissioning
Safety checkHeat-exchanger inspection and CO test resultsCombustion safety testing and CO detector placement after install
Protection after the jobParts and labor coverage for the repairEquipment warranty, installation warranty, and registration responsibilities

Scope example: replacing a failed ignitor in a mid-life furnace differs from replacing a furnace with a cracked heat exchanger, which is a safety replacement rather than a part swap. Ask for the heat-exchanger finding in writing before comparing a repair price against a replacement quote. Neither example is a priced customer job.

Before you approve the work

Ask who checks local permit and inspection requirements, who applies, and whether fees are included. Confirm exclusions, access arrangements, removal, cleanup, and the payment schedule in writing. Verify local requirements with your building department; they depend on the work and location.

Compare the written totals over the same period using your own energy bills and maintenance costs. Ask for the assumptions behind any savings estimate. Age alone does not diagnose a failed system or establish a payback period.

Reference: ENERGY STAR when-is-it-time-to-replace guidance.

HVAC work and cost ranges

Worksheet updated September 5, 2026 · Home Repair One editorial team

What changes your price

  • The failed part, an ignitor or flame sensor is cheap, a heat exchanger is not.
  • Gas versus electric, and the carbon-monoxide safety check.
  • Blower motor, control board, or thermostat faults.
  • Emergency or after-hours service in deep winter.

Free instant estimate

Get your own number

Averages only get you so far, your scope and ZIP produce a specific range in under a minute.

See my price range(561) 220-0117

No email to see your price · One vetted pro, matched to you

FAQ

How much does furnace repair cost?

A typical licensed visit runs about $400–$600 for diagnosis and a common part. A cracked heat exchanger is a safety issue that usually means replacement, not a small repair.

Why is my furnace blowing cold air or not turning on?

A dirty flame sensor, a failed ignitor, a tripped safety switch, or a thermostat problem are common. A tech diagnoses safely and rules out a cracked heat exchanger for carbon-monoxide safety.

Is a furnace problem dangerous?

It can be. Gas furnaces can leak carbon monoxide from a cracked heat exchanger. Any smell of gas, soot, or a CO alarm means shut it off and call a pro.

Related cost guides

(561) 220-0117Free estimate